| |
Test and Inspection Equipment |
 |
Continuity Tester
This continuity tester uses a red
LED light to transmit light down the
fiber, providing identification at
the fibers far end. Approximate
range is 2.5 km for multimode and 1
km for singlemode. A hybrid
patchcord and mating sleeve will
enable hook-ups of different
connector types. |
|
|
|
|
 |
Light Sources
These Noyes Light Sources are
handheld instruments designed for
performing insertion loss
measurements on fiber optic links
when used with an optical power
meter. All Noyes OLS models include
protective rubber boot, user’s
guide, and carry case. AC Adapters
are available. |
|
|
|
|
 |
Loss Test Sets
Optical Loss Test Kits include both
power meter and light source and are
designed for performing insertion
loss measurements on fiber optic
links. |
|
|
|
 |
Microscopes
NOYES OFS 300 series Microscopes
are used for the inspection of
optical fiber connectors. By
employing the universal 2.5mm
adapter cap, it can inspect any
standard connector for scratches,
dirt or other problems normally
associated with poor transmission
performance. The OFS 300 offers 60
hours of continuous battery life.
Along with the 2.5mm universal cap,
a holster and user guide are
included. |
|
|
|
 |
ORL and Certification Test Sets
These are the industry's fastest and easiest to
use Bi-Directional Optical Loss Test Sets (OLTS).
Featuring true optically stabilized light
sources which require no warm up, they display
bi-directional average loss and Return Loss (ORL)
in real time. The instrument can also be used as
a source & meter, tone generator / detector, or
high performance ORL meter. |
|
|
|
|
 |
OTDR's and Accessories
An Optical Time Domain Reflectometer is an instrument used to evaluate optical fibers based on detecting backscattered (reflected) light. An OTDR trace shows fiber attenuation for the system and location and magnitude of any losses from splices, breaks, connectors, and other events along a fiber link.
|
|
|
|
|
 |
Power Meters
Optical power meters are used to
measure optical power in Premises,
Telco or Broadband fiber optic
networks. When used with a LED or
laser light source, a power meter
can also measure the attenuation
(insertion loss) of multimode and
singlemode cables. |
|
|
|
 |
Reference Cable Kits
L-Tron's Reference Cable Kits
include (2) 3 meter simplex
patchcables and (2) mating sleeves.
Used for loss testing, these high
quality cables are factory
terminated for lowest loss. All
mating sleeves have ceramic
alignment sleeves. |
|
|
|
 |
Visual Fault Locator
Visual fault locators are used
during installation and repair to
find faults, check continuity,
verify a signal path and identify a
fiber. |
|
|
|
|
|
